Oklahoma City has a large stock of flat and low-slope roofs: warehouses along the I-40 and I-35 corridors, strip centers on May Avenue and Northwest Expressway, churches, schools, shops and metal buildings across the metro. Those roofs take a beating from spring hail, straight-line winds and summer sun.
Spray polyurethane foam (SPF) roofing is sprayed directly over a properly prepared roof deck or existing roof, where it bonds into one seamless layer with no seams or fasteners for water to find. A protective elastomeric coating, usually silicone or acrylic, goes on top to shield the foam from UV. The foam also adds continuous insulation, which cuts cooling loads under a hot Oklahoma roof.
We start every roof with a free inspection. We check for trapped moisture in the existing roof, review drainage and deck condition, and tell you whether a new foam roof, a recoat or a different system makes more sense.
Oklahoma City tip
Ask how wet areas of the existing roof will be found and removed before foam goes on. Spraying over saturated insulation traps water in the roof.
When Spray Foam Roofing Makes Sense
- ✓Flat or low-slope commercial roofs
- ✓Roofs with recurring leaks at seams
- ✓Ponding water after storms
- ✓Older built-up or modified bitumen roofs
- ✓Metal roofs with leaking fasteners
- ✓Buildings that run hot under the roof
How Spray Foam Roofing Handles Oklahoma Weather
Spray foam roofing is commonly installed at about 1 to 3 inches thick or more, and closed-cell roofing foam is dense enough to walk on. Thicker foam and granules embedded in the coating improve hail resistance, and a seamless roof gives wind fewer edges to lift.
The coating is what protects the foam, so most foam roofs are recoated every 10 to 20 years depending on the coating. Regular inspection after hail season catches small damage early, and repairs are usually simple patches.
Spray Foam Roofing Services We Offer
✓New Foam Roof Systems
SPF and coating over a prepared deck.
✓Re-Roof Over Existing
Foam over a sound existing roof after wet areas are removed.
✓Roof Recoating
Renewing the protective coating on older foam roofs.
✓Metal Roof Restoration
Sealing fasteners and seams on metal buildings.
✓Hail and Storm Inspections
Checking foam roofs after Oklahoma storms.
Spray Foam Roofing Cost in Oklahoma City, OK
| Project | Typical Range | What Affects It |
|---|---|---|
| New spray foam roof with coating | $4.00–$7.00 per sq ft | Thickness, prep and access |
| Recoat of an existing foam roof | $1.50–$3.50 per sq ft | Coating type and repairs |
| Wet insulation tear-out | Quoted per project | Area of saturated material |
| Metal roof restoration | Quoted per project | Fasteners, seams and coating |
Commercial roofing pricing depends on scope, access and code. Your free roof inspection comes with a written proposal.
How It Works
- 1
Roof Inspection
We check moisture, drainage and deck condition.
- 2
Prep
Wet areas are removed, the surface is cleaned and edges are detailed.
- 3
Foam and Coating
Foam is sprayed to thickness, then coated.
- 4
Final Walkthrough
We review drainage and coating coverage.
Related reading: Spray Foam Roofing for Flat Commercial Roofs Can Spray Foam Help With Hail and High Winds?